Renesas Emulation Pod M3062NT3-RPD-E - Manual (Page 73)

( 71 / 84 )
Figure 5.7 External dimensions of the converter board M30800T-PTC and a sample foot pattern
Unit: mm
(2) External Dimensions of the Converter Board M30800T-PTC
Figure 5.7 shows external dimensions of the converter board M30800T-PTC (included) for a 100-
pin LCC and a sample foot pattern for 100-pin 0.65-mm-pitch (100P6S-A).
When connected to a 100-pin LCC socket
*1. To use the AXS4003M295C
(Matsushita Electric Works,
Ltd.) or the IC61-1004-051
(Yamaichi Electronics Co.,
Ltd.), be sure to set up foot
patterns for the holders.
*2. To use the AXS4003M295C
(Matsushita Electric Works,
Ltd.), as the contacts of the IC
socket body touch the PC
board in the shaded area, thus
be sure to give special
consideration to the patterns
of traces so that no other pins
touch the PC board. (Through-
h o l e m o u n t i n g i s n o t
permitted.)
*2
*1
Unit: mm