Ricoh AFICIO 1035 - Manual (Page 41)

27
2. Copying
Basic Procedure
A
Make sure that the machine is in
Copy mode.
If the machine is not in Copy
mode, press the
{Copy} key.
B
When the machine is set for the
user code, enter the user code
with the number keys and then
press the
{{{{#}}}} key.
Reference
⇒ P.66 “Other Functions”.
C
Make sure that there are no previ-
ous settings remaining.
Note
❒ To clear settings, press the
{Clear Modes} key.
D
Set your originals.
Reference
⇒ P.29 “Setting Originals”.
E
Set your desired settings.
F
Enter the number of copies re-
quired with the number keys.
Note
❒ The maximum copy quantity
can be set between 1 and 999
(default: 999).
❒ To change the number entered,
press the
{Clear/Stop} key and
enter the new number.
G
Press the
{{{{Start}}}} key.
The machine starts copying.
Note
❒ When you set originals on the
exposure glass, press the {#}
k e y a f t e r a l l o r i g i n a l s a r e
scanned.
❒ Copies are delivered face down.
❒ To stop the machine during the
multi-copy run, press the
{Clear/
Stop
} key.
❒ To return the machine to the in-
itial condition after copying,
press the
{Clear Modes} key.
AdonisC2_AEcopy110F_FM.book Page 27 Wednesday, October 3, 2001 1:43 PM