Ricoh AFICIO 1035 - Manual (Page 137)

Stamp
123
2
F
Change the stamp position, size
or density.
If you do not wish to change, go to
step
G.
To change the stamp position,
size or density
A Press the [Change] key.
B Select the desired position,
size and density.
C Press the [OK] key.
G
After you specified all the desired
settings, press the [OK] key.
H
Press the [Cancel] key.
Note
❒ To cancel the settings, press the
[Cancel] key.
I
Set your originals, then press the
{{{{Start}}}} key.
User Stamp
32 MB of memory is required to use
this funct ion (If t he mach ine is
equipped with the Printer unit, 32 MB
memory is not required.).
Up to four messages which you use
frequently can be stored in the ma-
chine's memory and stamped on cop-
ies.
Preparation
Before using this function, you
have to store your messages with
the User Tools.
⇒ P.125 “Program/
Delete User Stamp”.
Limitation
❒ You cannot use the bypass tray
with this function.
❒ One message can be stamped at a
time.
Note
❒ You can change the print page
with the User Tools.
AdonisC2_AEcopy110F_FM.book Page 123 Wednesday, October 3, 2001 1:43 PM