RCA Scenium PHD50300 - Manual (Page 48)

REFERENCE
46 Chapter 7
Other Information
WALL
WALL
50mm (2”) 50mm (2”)
50mm (2”)
50mm (2”)
1240mm (48.8”)
766mm (30.2”)
50mm (2”)
Installing the Cinema Screen Monitor
IMPORTANT
• This device cannot stand on its own. Be sure to use a stand or original mounting unit.
• For correct installation and mounting it is strongly recommended to use a trained, authorized Cinema Screen
dealer.
Failure to follow correct mounting procedures could result in damage to the equipment or injury to the installer.
Product warranty does not cover damage caused by improper installation.
Attaching optional mounts or stand to the Cinema Screen monitor
The Cinema Screen monitor can be mounted on the wall using an optional wall mount or you can attach a floor stand (also
optional). For more information on mounting your Cinema Screen Display, see your Cinema Screen dealer.
If you choose to use the optional wall mount, it can be attached to the Cinema Scr een monitor in one of the following two
ways:
• While it is upright.
• While it is laying with the screen face down. If you choose this option, lay the pr otective sheet that came wrapped
around the monitor beneath the screen surface so it doesn’t get scratched.
Ventilation requirements for enclosure mounting
To allow heat to disperse, leave space between surr ounding objects as shown on the diagram below when installing.