Clean the air filter – Rimage EverestTM Printer User Manual
Page 32
Rimage Everest Printer
26
110632_L
Clean the air filter
Before you begin:
Power off the printer.
1. Remove
the
air filter.
a. At the rear of the Everest
printer, remove the two screws
holding the fan cover.
b. Remove
the
air filter.
2. Clean
the
air filter.
a. Use water to clean the air filter.
b. Allow
the
air filter to dry.
Fan cover
Screws
3. Prepare
the
printer for use.
a. When
the
air filter is dry, place it inside the fan cover.
b. Use
the
two screws to attach the fan cover.
c. Power on the printer. The printer is ready.