Clean the tacky rollers – Rimage EverestTM Printer User Manual

Page 31

Text mode
Original mode

Maintain the Everest printer

110632_L

Clean the tacky rollers

Before you begin:

Power off the printer.

1. Remove

the

print ribbon. For specific

instructions, refer to page 20.

2. To access the tacky rollers, remove

the supply roll (the unused portion) of
the print ribbon from the print ribbon
carrier.

3. Clean

the

tacky rollers.

a. Apply

isopropyl alcohol to the

sponge swab.

b. Use

the

sponge swab to clean

tacky roller 1.

c. Use

the

sponge swab to remove

any waxy buildup from other parts
of the ribbon carrier.

d. Reinstall

the

supply roll on the

print ribbon carrier.

e. Inside the printer, use the sponge

swab to wipe tacky roller 2.

4. Prepare

the

printer for use.

a. Install

the

print ribbon carrier.

Ribbon
carrier

Tacky
roller 1

Ribbon carrier

b. Close

all

latches.

c. Close

the

side cover.

d. Power on the printer. The printer

is ready.

Tacky
roller 2