Adjusting the print alignment and color density – Rimage EverestTM Printer User Manual
Page 20
Rimage Everest Printer
14
110632_L
Adjusting the print alignment and color density
1. Navigate to printing preferences (refer to page 10).
2. Select
the
Utility tab.
3. From
the
Utility tab, select Status Monitor. The Status Monitor dialog displays minimized on
your taskbar.
4. From your taskbar, select the Status Monitor. The Status Monitor dialog is active.
#
Tip: On the Status tab, you can view information about the Everest printer such as the
current firmware version, the progress of a print job, the installed ribbon type, and the
percentage of retransfer sheet remaining.
5. Select
the
Printer Information tab.
6. View or change the Print Alignment Settings.
a. From
the
Print Alignment Settings pane, select the Modify button.
b. Select the desired print alignment settings.
7. View or change the Color Density Settings.
a. From
the
Color Density Settings pane, select the Modify button.
b. Select the desired color density settings.
8. To close the Status Monitor dialog, select Close.