Ricoh Caplio RR30 - Manual (Page 68)

68
Chapter 1 / Section 3 Using Special Features for Improved Photography
To display the Grid Guide, follow the steps
below.
Turn the Mode Dial to (Shooting Mode).
Press the button.
The symbol display disappears.
Press the button.
The Grid Guide appears.
Buttons used here
Displaying the Grid Guide on the LCD Monitor
When you want to shoot an image evenly in the vertical or horizontal direction, it is convenient to
display the Grid Guide (calibration scale) and make your composition.
The Grid Guide is made of lines that divide the LCD Monitor screen into thirds both vertically and
horizontally. The Grid Guide is displayed only as an aid in shooting and is not part of the picture. With
the Grid Guide Display on, symbols (see p.18) will be displayed only for a few seconds right after
pressing Self-Timer, Flash or Macro buttons.
Every time you press the button, the view cycles in the sequence of No Display, Grid
Guide, LCD Monitor Off, Normal Symbol Display, No Display.
For how to switch the screen display, see p.18.