Ricoh Caplio RR30 - Manual (Page 66)

66
Chapter 1 / Section 3 Using Special Features for Improved Photography
To enter the date or date and time, follow the
steps below.
Turn the Mode Dial to (Shooting Mode).
Press the button.
The Shooting menu appears.
Press the buttons to switch between
displays as required.
Press the button to select [DATE
IMPRINT] and then press the
button.
Press the buttons to select the desired
setting.
Press the button.
The Date Imprint settings are completed.
Press the button.
The Shooting Menu closes and is displayed
on the bottom right of the screen.
This setting will be used for shooting until you change it.
Buttons used here
Inserting the Date into a Still Image (DATE IMPRINT)
You can stamp the date on the bottom right of your still images. You can choose to display the date in
one of two formats, Date (Y/M/D) or Date and Time (Y/M/D/H:M).
• If the date and time have not been set, DATE IMPRIMNT cannot be used. First make the date and time
settings.
• DATE IMPRINT cannot be used with movies.
• If you wish to imprint Date Stamp when shooting in TEXT MODE (while in Shooting Mode), make the settings
as described above.
For how to set date and time, see p.12.