Ricoh Caplio RR30 - Manual (Page 60)

60
Chapter 1 / Section 3 Using Special Features for Improved Photography
To make changes to the sharpness of still
images, follow the steps below.
Turn the Mode Dial to (Shooting Mode).
Press the button.
The Shooting menu appears.
Press the buttons to switch between
displays as required.
Select [SHARPNESS] and then press the
button.
Press the buttons to select the desired
setting.
Press the button.
Sharpness settings are complete.
Press the button.
The Shooting Menu closes and the setting value is
displayed on the right of the screen.
This setting will be used for shooting until you change it.
Buttons used here
Changing the Edge Quality of Still Images (SHARPNESS)
You can change the definition of your still images to either sharp or soft.
At purchase, your camera is set to Normal.