Ricoh Caplio RR30 - Manual (Page 18)

18
Chapter 1 / Section 1 Getting Started
Switching the Screen Display
If you press , you can change the screen display mode, such as switching between display/no
display of symbols, etc.
„ When Shot
For how to display the grid guide, see p.68.
When the No Display or Grid Guide Display is on, symbols will appear only for a few seconds right
after pressing
(Self-timer), (Flash) or (Macro) buttons.
Display Symbols No Display
Grid Guide
Display Synchro-Monitor
Mode
No Display
„ When Playing Back
Display Symbols
button
button
In the Synchro-Monitor Mode except with the following operations, the LCD Monitor is turned off (No Display). This is a
useful mode to reduce power consumption.
• Half-press the shutter button.
The LCD Monitor is tuned on and you can confirm composition. After you finish shooting with Full-Press, the LCD
Monitor will automatically turn off.
• Press the (Quick Review) button.
You can view the photo you just took (see p.71). By pressing the (Quick Review) button again, you can turn the
LCD Monitor off.
• Press the button
The LCD Monitor Display is turned on and you can make various settings for shooting (see p.24). By pressing the
button again, you can turn the LCD Monitor off.
• You cannot turn the LCD Monitor Display on/off by pressing (Self-timer), (Flash) or (Macro) buttons.
• Turning the LCD Monitor Display Off conserves battery life. In this case, shoot using just the Viewfinder.