Ricoh 1075 - Manual (Page 47)

Turning On the Power
33
2
Turning Off the Power
AAAA
Press the operation switch to
make the On indicator go off.
Note
❒ Even if you press the operation
switch, the indicator does not
go off and blinks in the follow-
ing cases:
• When communication is in
p r o g r e s s w i t h e x t e r n a l
equipment.
• When the hard disk is oper-
ating.
Turning Off the Main Power
Important
❒ Do not turn off the main power
switch when the On indicator is on
or blinking. Failure to observe this
may result in damage to the hard
disk or memory, leading to mal-
function.
❒ Pull out the power cord after you
turn off the main power switch.
Failure to observe this may result
in damage to the hard disk or
memory, leading to malfunction.
AAAA
Make sure the On indicator is off.
BBBB
Open the switch cover, and turn
off the main power switch to
make the main power indicator
goes off.
MartiniC1_GBzen2_FM.book Page 33 Friday, April 19, 2002 2:18 PM