Loading paper in tray 2 and 3, Loading paper in the large capacity tray (lct) – Ricoh 1075 User Manual
Page 131

B Loading Paper
117
6
Important
❒ Confirm that the top of the
stack is no higher than the
limit mark inside the tray.
❒ Align the left edge of the pa-
per stack to the left edge of
the tray.
Note
❒ Shuffle the paper before
loading.
❒ Straighten curled or warped
paper before loading.
CCCC
Gently push the paper tray in un-
til it stops.
Loading Paper in Tray 2 and 3
AAAA
Pull out the paper tray until it
stops.
BBBB
Square the paper, and then load it
in the tray.
Important
❒ Confirm that the top of the stack
is not higher than the limit mark
inside the tray.
❒ Align the left edge of the copy
paper stack to the left edge of
the tray.
Note
❒ Shuffle the paper before load-
ing.
❒ Straighten curled or warped pa-
per before loading.
CCCC
Gently push the paper tray in un-
til it stops.
Loading Paper in the Large
Capacity Tray (LCT)
AAAA
Open the top cover of the large ca-
pacity tray (LCT).
BBBB
Load the paper in the tray along
the edge on the left.
MartiniC1_GBzen2_FM.book Page 117 Friday, April 19, 2002 2:18 PM