Ricoh 1075 - Manual (Page 147)

Changing the Paper Size
133
6
DDDD
Set the paper size selector knob
inside the tray to the new size.
Important
❒ Problems might occur if the size
of the paper set does not match
the paper size selector, such as:
• Misfeeds
• Parts of the image are not
copied
To adjust the paper size to one
not available on the paper size
selector
A Set the paper size selector
knob to the
p p p p mark on the left.
B Press the {{{{User Tools/Counter}}}}
key.
C Press the [System Settings] key.
D Press the [Tray Paper Setting] key.
E Press the [Tray Paper Size] key.
F Select the size, and then press
the [OK] key.
G Press the [Exit] key or press the
{{{{User Tools/Counter}}}} key to exit
the User Tools.
Reference
For details, see p.79 “Tray
Paper Settings”.
EEEE
Gently push the paper tray until it
stops.
FFFF
Check the paper size displayed
on the display panel.
MartiniC1_GBzen2_FM.book Page 133 Friday, April 19, 2002 2:18 PM