RTS Digital Matrix s Keypanels DKP-8 - Manual (Page 40)

Menu Mode
34
1. When you select PHONE, the point-to-point scroll list will display for the currently selected intercom system.
2. Turn the SELECT control to locate one of the two intercom ports to which the TIF is connected, then tap SELECT.
The call waiting window will display TAP KEY.
3. Tap the intercom key you want to use as a phone key.
The name of the intercom port you select will appear in the display above the key.
If restrictions against key assignments have been imposed using the intercom system configuration software, the intercom key
may ignore the assignment. In this case, contact the intercom system administrator if you need to make a change.
Unlike most other types of key assignments which let you select the activation method (talk, listen, talk+auto follow, etc.),
phone keys are always assigned as talk keys with auto-listen. When you activate the key both talk and listen will be activated.
4. Double-tap the SELECT control to return to the previous menu level. Or, press and hold the SELECT control for two
seconds to exit the menu mode.
For a phone key, the port assignments are automatically uploaded to the intercom system and saved to the on-line
configuration. However, the phone function itself must be saved locally using the SAVE CFG command. See “Menus,
SERVICE, SAVE CFG” on page 44.. Otherwise, the phone function will be lost when the keypanel is turned OFF.
Menus, KEY ASGN, REDIAL (For KP-12, DKP-12 Only)
You use this menu item to assign a redial key for use along with one or more phone keys. If the KP-12 has multiple phone keys
assigned, the redial key redials the last number dialed on the last phone key that was used.
1. When you select REDIAL, the point-to-point scroll list will display for the currently selected intercom system.
2. Turn the SELECT control to locate one of the intercom ports which the TIF is connected, then tap SELECT.
The call waiting window will display TAP KEY.
3. Tap the intercom key that you want to use as a redial key.
The name RDL will appear in the display above the key.
If restrictions against key assignments have been imposed using the intercom system configuration software, the intercom key
may ignore the assignment. In this case, contact the intercom system administrator if you need to make a change.
Unlike most other types of key assignments, which let you select the activation method (talk, listen, talk +auto follow, etc.)
redial keys are always assigned as talk keys with auto-listen. When you activate the key both talk and listen will be activated.
4. Double-tap the SELECT control to return to the previous menu level. Or, press and hold the SELECT control for two
seconds to exit menu mode.
5. For a redial key, the port assignment is automatically uploaded to the intercom system and saved to the online
configuration. However, the redial function itself must be saved locally using the SAVE CFG command. See “Menus,
SERVICE, SAVE CFG” on page 44.. Otherwise, the redial function will be lost when the keypanel is turned OFF.
Menus, KEY ASGN, UPL
You use this menu item to assign a UPL to a key for use along with one or more keypanel keys.
1. When you select UPL, the UR scroll list will display.
2. Turn the SELECT control to scroll through the URs, then tap SELECT for the desired resource.
The call waiting window will display key functions.
3. Turn the SELECT control to scroll through the key functions, then tap SELECT for the function.
The call waiting window will display Tap Key.
2. If the intercom system is trunked, and the TIF is located in another intercom system. turn the SELECT control to display ICOM, followed
by the desired intercom system name, then tap SELECT. Wait for the point-to-point list to be obtained from the selected intercom system.