Switching chord sets – Roland RS-50 User Manual

Page 25

Text mode
Original mode

Try out the sounds

Quick Start

■

Switching chord sets

Then, try to change chord sets.

fig.q04-10

Use VALUE [-]/[+] to select a Chord Set.

The user chord set appears after the preset chord sets.

When you press [EXIT], the Multi-chord Memory function will remain on
and you will return to the previous screen.

If you want to select a chord set once again, press [CHORD MEMORY] so it goes out,
and then press [CHORD MEMORY] once again so it is lit.
The selected chord set remains stored in memory even while the power is off.

To turn off the Multi-chord Memory function, press [

CHORD MEMORY

]

again so the indicator goes out.

Multi-chord set list

(p.

122)

You can create your own chord set by saving chords you have created.
For further information, refer to Creating an original chord set (User Chord Set)
(p. 64).

RS-50_e3.book 25 ページ２００３年１１月７日　金曜日　午後７時１分