Ricoh feeder - Manual (Page 9)

3
1. When the Machine Does
Not Operate As wanted
This chapter explains basic troubleshooting procedures that are applicable to all
functions of this machine.
Indicators
This section explains Indicators displayed when the machine requires the user
to remove misfed paper, add paper, or other perform other procedures.
x: Misfeed indicator Appears when a misfeed occurs.
See p.93 “Removing Jammed Paper”.
B: Add Paper indicator Appears when paper-out condition occurs.
See p.65 “Loading paper”.
D: Add Toner indicator Appears when toner runs out.
See p.87 “Adding Toner”.
d: Add Staple indicator Appears when staples run out.
See p.90 “Adding Staples”.
y: Empty Hole Punch Receptacle
indicator Appears when the hole punch receptacle is full.
See p.108 “Removing Punch and Staple Waste”
0: Empty Waste Staple Receptacle
indicator Appears when the waste staple receptacle is full.
See p.108 “Removing Punch and Staple Waste”
L: Service Call indicator Appears when the machine is mulfuncitoning, or needs
repairing.
M: Open Cover indicator Appears when the front cover, etc, is open.