Ricoh feeder - Manual (Page 118)

Remarks
112
7
Power Connection
The following explains power supply.
R WARNING:
R WARNING:
R WARNING:
R CAUTION:
R CAUTION:
• Make sure the plug is inserted firmly in the wall outlet.
• Voltage must not fluctuate by more than 10%.
• The wall outlet shall be installed near the machine and shall be easily accessible.
• The supplied power cord is for use with this equipment only. Do not
use with other appliances. Doing so may result in fire, electric shock,
or injury.
• Connect the machine only to the power source described on the inside
front cover of this manual. Connect the power cord directly into a wall
outlet and do not use an extension cord.
• Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it. Do not pull it hard nor bend it more
than necessary. These actions could cause an electric shock or fire.
• If the power cord is damaged (exposure of the core, disconnection,
etc.), contact your service representative to change a new one. Oper-
ating the machine with a damaged power cord may cause an electric
shock or fire.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
• To disconnect the power code, pull it out by plug. Do not drag the code itself.
Doing so may result in damage to the code, leading to fire or electric shock.