Ricoh feeder User Manual
Page 23
When a Job is Not Performed
17
1
Note
❒ Stapling cannot be used at the same time for multiple functions.
❒ If the machine is capable of executing multiple functions simultaneously,
specify which function should have priority in “Print Priority”. This setting is
factory-preset to “Display Mode”. For setting of Printing Priority Function,
see “Print Priority”, General Settings Guide.
❒ When Finisher or Booklet Finisher is installed on the machine, you can specify
the output tray where documents are delivered. See “Output tray settings”,
General Settings Guide.
❒ Operation speed might be reduced if you scan originals while a print job is in
progress.