3 placing a waypoint, At the cursor, At your vessel’s position – Raymarine C Series User Manual
Page 45: At a known position, Page 34, Page 33
Chapter 3: Working with Waypoints
31
3.3 Placing a waypoint
A waypoint can be placed at:
• The cursor position.
• Your vessel’s position.
• At a position of your choosing (using lat/lon or Loran TD coordinates between 80
0
N/S).
When you are placing a waypoint, you can either accept the default or customize its
details. For more information see
page 34
.
Once a waypoint has been placed, you can view its details and edit them (if necessary).
For more information, see
page 33
and
page 34
.
... at the cursor
... at your vessel’s position
If the system cannot determine your position, a warning is displayed and the waypoint
is not placed.
... at a known position
WPTS
MOB
WAYPOINT AT
CURSOR
D7457-2
OK
Move cursor to
required position
for waypoint
Accepts default
Or
Wait 4 secs
WAYPOINT AT
VESSEL
WPTS
MOB
D7458_2
WPTS
MOB
x2
OK
Accepts default
Wait 4 secs
Or
Or
WPTS
MOB
WAYPOINT AT
LAT/LON...
50'.838N
01
o
06'.331W
Position:
Place Waypoint
50
D7459_2
OK
Enter position
x 2
81221_4.book Page 31 Tuesday, February 28, 2006 5:24 PM