Runco Video Xtreme VX-6000d - Manual (Page 82)

Operation
70 Runco VX-6000d Owner’s Operating Manual
PRE
L
IMINAR
Y
Automatic Contrast: The VX-6000d can dynamically adjust the contrast (white level)
according to the color content in the signal, to produce the best picture quality. Select
Automatic Contrast from the Picture Adjust menu to activate this feature. Set it to Off, 1, 2,
or 3 as desired. Selecting “3” results in a higher average white level than the other
settings.
Default: To reset all picture quality settings for the current input to their factory-default
values, select Default from the Picture menu.
White Balance The VX-6000d provides nine adjustable white balance parameters, allowing precise
adjustment of the intensity of the red, blue and green color components in the dark areas
(Offset), light areas (Gain) and “mid-tone” areas (Gamma).
You can adjust these parameters as needed and store them in any of six presets (memory
locations). The selected white balance preset can, in turn, be associated with a “Picture
Memory“ preset (refer to White Balance on page 68). The most logical way to do this is
to associate a white balance preset with the picture memory preset of the same name;
however, you can associate a white balance preset with any picture memory preset.
Mem. Select: To select and edit a white balance preset, select Mem. Select from the
White Balance menu.
Red Gamma/Green Gamma/Blue Gamma: Refer to ISF Night - Display Color on
page 59.
Red Gain/Green Gain/Blue Gain: Refer to ISF Night - Display Color on page 59.
Red Offset/Green Offset/Blue Offset: Refer to ISF Night - Display Color on
page 59.
Default: To reset the Gamma, Gain and Offset settings for the currently-selected white
balance preset to their factory-default values, select Default from the White Balance menu.
Then, select Yes to confirm the reset.
HD/RGB Adj. Select HD/RGB Adj. from the Main Menu to view input signal resolution and timing
information. To do this, select Signal Info from the HD/RGB Adj. menu.
Signal Info: Select Signal Info from the HD/RGB Adj. menu to display the resolution,
horizontal frequency and vertical frequency of the input current signal.
➤
Gamma
Red Gamma
Green Gamma
Blue Gamma
0
0
0
Gain
Red Gain
Green Gain
Blue Gain
0
0
0
Offset
Red Offset
Green Offset
Blue Offset
0
0
0
Default
White Balance
Mem. Select 1
➤
HD/RGB Adj.
Frequency 0
Phase 0
H-Shift
0
V-Shift 0
Default
Special Modes
Signal info
Auto Setup