Ricoh 3260 - Manual (Page 90)

Configuring/Registering Scan Settings
82
7
Programs
You can register frequently used set-
tings in the machine memory and re-
call them for future use.
Note
❒ You can register up to 10 programs
for the scanner mode.
❒ You can use the settings registered
in program No.10 as the initial
mode by selecting [Program No.10]
in [Change Initial Mode] of [Scanner
Features]
.
❒ Programs are not deleted by turn-
ing the power off or by pressing
the
{{{{Clear Modes}}}} key. They are de-
leted only when you delete them
or overwrite them with another
program.
❒ The setting which can be regis-
tered in a program are as follows:
the scan settings, 1 sided/2 sided
original, Top to Top/Top to Bot-
tom, Last Page, Divide, Original
F e e d T y p e , F i l e T y p e , a n d
Batch/SADF.
Registering a Program
AAAA
Make the settings you want to
register in the initial display of
the scanner mode.
BBBB
Press the
{{{{Program}}}} key.
CCCC
Press [ m m m m Register].
DDDD
Press the program number you
want to register.
Note
❒ Program numbers with m al-
ready have settings in them.
EEEE
Enter the program name with the
soft keyboard that appears on the
display panel.
Note
❒ You can enter up to 40 charac-
ters.
❒ If it is not necessary to enter the
program name, proceed to step
F .
FFFF
Press [OK].
When the settings are successfully
registered,
m appears on the left
side of the registered program
number and the program name ap-
pears on the right side. The display
returns to the initial display after a
moment.
AFR004S