Ricoh 3260 User Manual

Page 88

Configuring/Registering Scan Settings

When using the exposure glass

A Press the {{{{Start}}}} key.

When scanning is finished, the
time remaining to place addi-
tional originals is displayed.

Note

❒ The selected destination ap-

pears while scanning the
originals.

B When there are additional orig-

inals, place them within the
specified time, and then press
the

{{{{Start}}}} key.

Repeat this step until all origi-
nals are scanned.

Note

❒ If you change settings while

the machine is waiting for
addition al originals, the
countdown stops. Press the

{{{{Start}}}} key to resume the
countdown and scanning.

When using the ADF

A Select [SADF] in [Original Feed

Type]

Note

❒ If [SADF] does not appear, se-

lect [SADF] in [Switch to Batch]
of [Scanner Features]. See.
p.101 “Switch to Batch”.

B Press the {{{{Start}}}} key.

When scanning is finished, the
time remaining to place addi-
tional originals is displayed.

Note

❒ The selected destination ap-

pears while scanning the
originals.

C When there are additional orig-

inals, place them within the
specified time.
The machine starts scanning au-
tomatically.

Note

❒ If you change settings while

the machine is waiting for
additional originals, the
countdown stops. Press the

{{{{Start}}}} key to resume the
countdown and scanning.

❒ You can also use the expo-

sure glass instead of the
ADF. In this case, you must
press the

{{{{Start}}}} key to start

scanning.

DDDD

When all originals are scanned
and the countdown is finished,
the machine starts storing or
sending automatically.

Note

❒ You can also press the {{{{#}}}} key

to start storing or sending.