Roland PAINO DISCOVER5 - Manual (Page 48)

Using the performance functions
46
r
You can also select the desired value field with
the [PREV] and [NEXT] buttons.
(6) Repeat steps (4) and (5) for the other notes
whose pitch you want to change.
Note: This pitch is only used when the corresponding
on-screen key is displayed in white. Do not forget to
switch it on.
●Storing your new scale
If you think you’ll need that scale in the future,
you should write – or “Memorize”– it:
(7) Program the scale you wish to save by
switching the desired notes on or off (see
above).
(8) Press the [Memorize] field in the lower right
corner of the display.
The display now looks as follows:
(9) Press a [Mem≈1]~[Mem≈3] field to save your
settings in the corresponding Scale Tuning
memory.
The display now responds with the following
message and then returns to the Scale Tune
page.
(10) Press the [EXIT] button to return to the main
page.