Id i – Radio Shack PRO-95 User Manual
Page 66
Tr
unki
n
g
66
3. Press
FUNC
,
or
to
move to the desired bank.
4. Press
or
to select the
ID memory.
5. Press
L/OUT
to lock out the
ID.
L
appears.
6. To remove the lockout from a
trunking ID, manually select
the ID memory, and press
L/OUT
until
L
disappears.
You can confirm the ID code while
the scanner shows the text when
the received signal is a voice
channel.
1. Press
TEXT
while the scanner
is receiving the voice channel
and indicating the text name.
The ID code appears as
MOT:XXXXXX
or
ED:XXXX
.
2. Press
TEXT
again to cancel.
D
ELAY
F
UNCTION
IN
ID
I
NDICATION
M
ODE
You can set the ID delay function
separate from the channel delay.
1. Press
FUNC
then
./DELAY
while you are programming
the trunked ID.
Use Up/Down
keys to set ID delay
.
2.0 seconds
appears.
2. Press
or
to select
None
,
0.5
,
1.0
,
1.5
,
2.0
,
2.5
,
3.0
,
3.5
or
4.0 seconds
.
3. Press
ENTER
.
Ф
Ф
NOTE
Ô
When activated, ID
delay watches the
control channel
command for the
delay time when the
signal disappears
from the voice
channel.