Radio Shack PRO-95 - Manual (Page 60)

Tr
unki
n
g
60
P
ROGRAMMING
M OTOROLA T RUNKING
S
YSTEM
(800 MH
Z
)
Follow these steps to program 800
MHz band Motorola trunking.
Ô
1. Press PGM then TRUNK to
enter the ID program mode.
2. Press FUNC then or to
select the desired bank.
3. Press MODE and select
Motorola trunking mode.
4. Press FUNC then 3.
Use Up/
Down keys to set 800MHz base.
Normal
appears.
5. Press or to select
Normal or Offset and press
ENTER .
• If you are uncertain about the
base frequency, use the
default setting. The default
setting is
Normal .
• If you cannot receive with the
Normal setting, change to
Offset . The base frequency in
Normal is 851.0125 MHz. The
base frequency in Offset is
851.0000 MHz.
P
ROGRAMMING
F
LEET
M
APS
You must set the fleet map if you
want to receive a Motorola Type I
system. Fleet maps are included
along with other information about
Motorola Type I systems at
www.trunkscanner.com.
Follow these steps to program a
fleet map.
Ô
NOTE
Ô
• On the 800 MHz
trunking band, you
can select a base
frequency (normal
or offset).
• On the 900 MHz
trunking band, you
do not need to set
the base
frequency (base,
offset, step).