Radio Shack PRO-95 - Manual (Page 46)

S
p
eci
a
l
F
ea
tur
e
s
46
Reviewing the Lock-Out
Channels
To review all locked out channels,
press
MANUAL . Then repeatedly
alternate between pressing FUNC
and then L/OUT to view each
locked-out channel. When you
finish reviewing locked-out
channels, press
MANUAL .
Locking Out Frequencies
To lock out a frequency during a
search, press
L/OUT when the
scanner stops on that frequency.
The scanner locks out the
frequency, then continues
searching.
Reviewing Locked-Out
Frequencies
To review the frequencies within a
search bank that you locked out:
Ô
1. Press SEARCH to set search
mode.
2. Press FUNC then L/OUT . The
locked-out frequency and
Lockout list appear. Press
or to review the list. The
locked-out number and the
total locked-out number also
appear as
L/O XX of YY . (The
tenth of thirty locked out
numbers would appear as
L/O
10 of 30 .) If the search bank
has no locked-out
frequencies,
Empty. Lockout
list appears. Press FUNC then
L/OUT again to cancel
reviewing locked-out
frequencies.
Ô
NOTE
Ô
• The scanner does
not store locked
out frequencies
during a search.
• You can lock out
as many as 50
frequencies in
each bank. If you
try to lock out
more,
Memory
full! appears.
• If you lock out all
frequencies in one
search bank and
only this search
bank is activated,
All ranges Locked
out!
appears and
the scanner does
not search.