Radio Shack PRO-95 - Manual (Page 64)

Tr
unki
n
g
64
8. If you want to tag the ID,
press TEXT , enter the desired
text tag for the ID. Then press
ENTER (see “Text Input Chart”
on Page 31).
9. To store the next ID memory
in sequence, press and
repeat Step 4.
10. Press SCAN to start scanning.
Ô
If you entered an ID code that is
already stored in another ID
channel,
Dupl ID appears. If you
want to store the ID code, press
ENTER. To cancel the operation,
press CL .
T
ALK
G
ROUP
ID H
OLD
You can set your scanner to follow
a trunking signal that you want to
track during scanning. While the
scanner is stopped on a voice
channel (
VC appears), hold down
TRUNK until ID hold ON. appears.
When ID hold is activated and the
scanner receives a voice channel,
Bank 0-0 ON
ID No. 01
MOT: none Next
location
Ô
NOTE
Ô
• If you made a
mistake in Step 4,
Invalid ID
. appears
and the scanner
beeps when you
press ENTER.
Start again at
Step 3.
• You can enter
either decimal or
AFS code for ED
(EDACS) ID. The
default setting is
decimal ID entry.
When you press
FUNC then 2,
AFS
format
appears
for about 2
seconds. Now you
can enter the ID
code with AFS
format.
Bank 0-0 ON
ID No. 00
MOT: 02992
Dupl ID 1-12
Duplication