Roland M-10MX - Manual (Page 4)

7
Using a variety of audio sources for video post-production
* Post-production often involves the process of adding a variety of audio sources such as music, sound effects, and
narration to previously recorded video.
Example 2) Editing Sound for Video
R L R L R R L L
Dynamic
Mic
CD Player Portable Audio Player Camcorder Video Cassette Recorder
Images
Included AC adaptor
Srereo
Headphones
Plug-in power
compatible mic (stereo)
8
Notes
* To prevent malfunction and/or damage to speakers
or other devices, always turn down the volume, and
turn off the power on all devices before making any
connections.
* When connection cables with resistors are used, the
volume level of equipment connected to the inputs
(INPUT) may be low. If this happens, use
connection cables that do not contain resistors.
* Howling could be produced depending on the
location of microphones relative to speakers. This
can be remedied by:
1.Changing the orientation of the microphone(s).
2.Relocating microphone(s) at a greater distance
from speakers.
3.Lowering v olume levels.
Example 3) Audio Equipment Mixing
R L R R L L
Portable Audio Player
Included AC adaptor
CD Player
MD Player
Srereo
Headphones
Portable
MD Player/Recorder
Powered Monitor
Portable Recorder
L R
Set the SAMPLE RATE switch to match the M-10MX’s
sample rate to the sample rate of your MD player/recorder.