Roland M-10MX - Manual (Page 3)

5
Block Diagram
PHONES
VOLUME
A/D
INPUT 1/2
INPUT 9/10
Bus R Bus L
INPUT 1/2
INPUT 3/4
CHANNEL
VOLUME
CHANNEL
VOLUME
CHANNEL
VOLUME
CHANNEL
VOLUME
CHANNEL
VOLUME
INPUT 7/8
INPUT 5/6
INPUT 5/6
SENS
SENS
SENS
SENS
SENS
VOLUME
SENS
MAIN
VOLUME
OVER
LOAD
MAIN OUTPUT
PHONES
DIGITAL OUTPUT
1/4" Phone
1/4" Phone
1/4" Phone
RCA
RCA
RCA
Stereo Mini
TRS Impedance Balanced
Plug-in power
compatible
Stereo Mini
COAXIAL
OPTICAL
RCA
Main Features
The M-10MX is a lightweight and compact mixer providing 10 channels of input (5 stereo channels),
and is an ideal choice for multimedia applications. In addition to covering conventional mixing needs, it
can also be used for audio mixing when editing videos.
Phone jacks and RCA pin jacks are provided for
input, allowing you to connect mics, electronic
instruments, or any other type of audio device.
Plug-in powered mics are also supported by a
special input jack (stereo mini).
The M-10MX can be powered by the supplied AC
adaptor or by batteries. A switch lets you select
the desired type of power supply.
Two types of digital output connectors (optical
and coaxial) are also provided. These output the
mixed sound as 24-bit, 96 kHz digital audio.
Additionally, either 44.1, 48, or 96 kHz can be
selected as the sampling frequency.
A headphone jack is provided for convenient
practicing on your own or at night.
A Rich Array of Input/Output Jacks
Two-way Power Supply
Digital Output
Headphone Jack
6
Connections
* “DTMP” (Desk-Top Media Production) refers to setups that let you use your computer in new ways to enjoy
video and music.
* You must minimize the volume of the MAIN and the your digital powered monitor speakers before you turn the
M-10MX’s power on or off.
Example 1) Mixing and Switching Sound for DTMP
R L L R
Dynamic Mic
Sound Module
Keyboard
Included
AC adaptor
Stereo
Headphones
Sound Module Mixer
R L R L
Digital Powered Monitor
Computer
Audio Interface
Optical Cable
TRS Balanced
Set the SAMPLE RATE switch to match the M-10MX’s
sample rate to the sample rate of your audio interface.
If you’re using the M-10MX
as a sub-mixer for another
mixer, connect the OUTPUT
L/R jacks to the input jacks
of your other mixer.
If you’re using a
monaural dynamic
mic, connect it to
channel 1 (MIC) or
channel 3 (MIC).
Coaxial
Cable
For the highest audio
quality, set the
SAMPLE RATE switch
to 96 kHz.