Ricoh Aficio AP2700 - Manual (Page 87)

Removing Misfed Paper
69
5
Removing Misfed Paper
When a paper misfeed occurs, an er-
ror message appears on the panel dis-
play. The procedure you should
follow to remove the misfed paper
depends on the location of the mis-
feed, which is indicated on the panel
display.
R CAUTION:
Important
❒ More than one misfed area might
be indicated. In this case, check ev-
ery applicable area. See the follow-
ing illustrations.
❒ If paper continues to misfeed,
check the following points.
• Confirm that the setting of the
paper size dial matches the size
and feeding direction of the pa-
per loaded in the paper tray.
• Confirm that the toner bottle is
set correctly.
❒ If a paper misfeed still occurs, con-
tact your sales or service represen-
tative.
❒ Do not leave any torn paper scraps
within the printer.
When "Misfeed: A" Appears
A
Open lower right cover 1.
B
Remove the misfed paper from
inside of lower right cover 1.
C
Close lower right cover 1.
Note
❒ Close the cover by pushing the
center area of the cover.
• When removing misfed paper,
do not touch the fusing section
because it becomes very hot.
A
B
D
E
C
Y
Z
R
ZAEY060E
ZAEH040E
ZAEH041E