Ricoh Aficio AP2700 User Manual

Page 61

Loading Paper and Other Media

❒ When you set thick paper in tray

2, do not stack paper above the
lower limit mark (

A) of tray 2.

Note

❒ Shuffle the paper before setting

in the tray.

❒ Load paper face up onto the

tray.

Align the side guide for the load-
ed paper size (

B) by opening the

release lever of the side guide
(

A).

Set paper guide lock to the
“locked” position.

Align the rear guide for the load-
ed paper size slightly by pushing
the releasing lever of the rear
guide.

Adjust the paper size dial for
loaded paper size.

Important

❒ Confirm that the setting of the

paper size dial matches the pa-
per size and feed direction of
the paper in the tray. Otherwise,
the paper misfeed or unexpect-
ed printing result might occur.

❒ Confirm that the paper size dial

matches the actual paper size
loaded in the tray. If the actual
paper size is not shown on the
dial, set the dial to "p" and
specify the paper size using the
operation panel. For more infor-
mation on specifying the paper
size, see P.27 “Paper Types and
Sizes”.

Slide the tray into the printer un-
til it stops.

ZAEY052E

ZAEY031E

ZAEY032E

ZAEY033E

ZAEY050E