Ethernet - copper, Ethernet - fiber, 1 ethernet - copper – RuggedCom RUGGEDBACKBONE RX1501 User Manual
Page 13: 2 ethernet - fiber
RuggedBackbone™ RX1501
Installation Guide
Chapter 2
RuggedBackbone™ Modules
Ethernet - Copper
7
NOTE
Only one T1/E1 module may be used per router.
On the RX1501, 2-port modules can only be inserted in LM1 and LM2.
Section 2.3.1
Ethernet - Copper
Figure 3: CG01: 2 × 10/100/1000TX RJ45
Figure 4: CG03: 2 x 8-Pin 10/100/1000TX M12
Figure 5: 6TX01: 6 × 10/100TX RJ45
Figure 6: 4TX03: 4 x 8-Pin 10/100TX M12
Figure 7: 4TX04: 4 x 4-Pin 10/100TX M12
Section 2.3.2
Ethernet - Fiber
Figure 8: FX**/FG**: 2 × 100FX/1000SX/1000LX LC
Figure 9: 4FX**: 4 × 100FC LC
Figure 10: FX03: 2 × 100 FX MTRJ
Figure 11: 4FX03: 4 × 100FX MTRJ