Roland HP101 - Manual (Page 23)

23
Chapter 3. Changing Various Settings
Changing the Damper
Pedal’s Resonance
On an acoustic piano, depressing the damper pedal makes
the notes you play resonate with other strings, adding rich
reverberations and fatness to the sound. The damper pedal
on the HP101 recreates this resonance (damper resonance)
when depressed.
You can select from eight levels of depth for the resonant
sound (resonance level).
This is set to “5” when the instrument is turned on.
* This setting is enabled only with the piano tones. You cannot
set this for other tones.
1.
While holding down the [Metronome] and [Reverb/
Key Touch] buttons, press the appropriate key (C2–G2)
on the keyboard.
Larger values will produce a deeper effect.
Setting the Tuning Curve
(Stretch Tuning)
A piano is generally tuned to a pitch with a lower bass range
and a higher treble range than equal temperament. This
special tuning method for pianos is called “Stretch Tuning.”
→ This effect works only with the piano tones.
Stretch Tuning is set to ON when the instrument is turned
on.
1. While holding down the [Metronome] and [Reverb/
Key Touch] buttons, the “B 7” note to turn the setting
On, or press the “A7” note to turn the setting Off.
C5 C6 C7 C8 C3 C2 C1
Damper Resonance Stretch Tuning
While holding down the [Metronome] button and
[Reverb/Key Touch] button, press the corresponding key.
Key C2 C 2 D2 E 2 E2 F2 F 2 G2
Depth of
Effect
1 2 3 4 5 6 7 8
Key Values Descriptions
A7 Off
This is the standard tuning curve.
This is the right choice when using
Dual play (p. 16), or when playing in
ensemble with other instruments.
B 7 On
This tuning curve expands the bass
and treble ends somewhat. It is suit-
able for performances such as piano
solos. This setting is in effect when
you turn on the power.
C7 C6 C8
A7
Off On
Press
While holding down
two buttons...
HP101_e.book 23 ページ ２００４年８月３１日 火曜日 午後２時１１分