Roland HP101 - Manual (Page 13)

13
Chapter 2. Performance
Applying Effects to the Sound
fig.panel2-5
■ Adding Reverberation to the Sound (Reverb)
By applying the reverb effect you can produce a pleasant reverberation, making it
sound as though you were performing in a concert hall.
1
Press the [Reverb/Key Touch] button.
The button’s indicator will light, and a reverb effect will be applied to the sound.
To cancel the reverb effect, press the [Reverb/Key Touch] button, getting its
indicator to go dark.
■ Changing the Depth of the Reverb Effect
The amount (depth) of the reverb effect can be set to any of eight levels.
1
Hold down the [Reverb/Key Touch] button and press the “C ” or “D ”
key.
Pressing the “C ” key as you hold down the [Reverb/Key Touch] button reduces
the amount of reverb effect applied. Holding down the [Reverb/Key Touch] button
and pressing the “D ” key increases the reverb effect.
To restore the depth of the reverb effect at the time the power is turned on, hold
down the [Reverb/Key Touch] button and press the “C ” and “D ” keys
simultaneously.
When you play back an
internal song, the reverb effect
will automatically be turned
on (the button’s indicator
lights).
You can change the Depth of
the Reverb Effect by pressing
any “C ” or “D ” key.
C# D#
Press While holding down
the [Reverb/Key Touch]
buttons...
HP101_e.book 13 ページ ２００４年８月３１日 火曜日 午後２時１１分