Roland HP101 - Manual (Page 21)

21
Chapter 3. Changing Various Settings
Tuning to Other Instruments’
Pitches (Master Tuning)
In situations such as when playing ensemble with other
instruments, you can tune the HP101’s standard pitch to the
pitch of another instrument. The standard pitch generally
refers to the pitch of the note that’s played when you finger
the middle A key. This tuning of all the instruments to a
standard pitch is called “tuning.”
You can set the standard pitch anywhere in a range of 415.3
Hz to 466.2 Hz.
When the instrument is turned on, the standard pitch is set to
“440.0 Hz.”
■ Lowering/ Raising the
Standard Pitch
1.
While holding down the [Metronome] and [Reverb/
Key Touch] buttons, press the “C 1” note to lower the
standard pitch, or the “D 1” note to raise it.
Each time you press the “C 1” key, the pitch will fall by
0.1 Hz. If you continue holding the key, the pitch will
continue falling.
Each time you press the “D 1” key, the pitch will rise
by 0.1 Hz. If you continue holding the key, the pitch will
continue rising.
■ Setting the Standard Pitch to
440.0 Hz
1. While holding down the [Metronome] and [Reverb/
Key Touch] buttons, press the “C1” key on the
keyboard.
The standard pitch will be set to 440.0 Hz. This is the
most commonly used setting. The A4 (Middle A) key
will sound at 440.0 Hz.
■ Setting the Standard Pitch to
442.0 Hz
1.
While holding down the [Metronome] and [Reverb/
Key Touch] buttons, press the “D1” key on the
keyboard.
The standard pitch will be set to 442.0 Hz. This setting is
often used for concert pianos. The A4 (Middle A) key
will sound at 442.0 Hz.
C1
Press
Lower
the pitch
Raise
the pitch
While holding down
two buttons...
C1
Press
While holding down
two buttons...
D1
Press
While holding down
two buttons...
You can confirm the pitch of A4 by holding down the
[Metronome] and [Reverb/Key Touch] buttons and
pressing either the A0, B 0, or B0 key.
A0 B0
Press
While holding down
two buttons...
HP101_e.book 21 ページ ２００４年８月３１日 火曜日 午後２時１１分