Renesas Compact Emulator M30620T-CPE - Manual (Page 9)

( 9 / 52 )
IMPORTANT
Note on Malfunctions in the System
• If the emulator malfunctions because of interference like external noise, shut OFF power to the
emulator once and then reactivate it.
WARNING
Warning for Installation:
• Do not set this product in water or areas of high humidity. Spilling water or some other liquid into
the main unit can cause an unrepairable damage.
Warning for Use Environment:
• This equipment is to be used in an environment with a maximum ambient temperature of 35 °C. Care
should be taken that this temperature is not exceeded.
CAUTION
Caution to Be Taken for Modifying This Product:
• Do not disassemble or modify this product. Disassembling and modifying the product will void
your warranty.
Cautions to Be Taken for This Product:
• Use caution when handling the main unit. Be careful not to apply a mechanical shock.
• Do not touch the connector pins of the emulator main unit and the target MCU connector pins
directly. Static electricity may damage the internal circuits.
• Do not pull the compact emulator main unit by the serial cable for connecting to the target system.
The cable may cause a break.
• Do not use inch-size screws for this equipment. The screws used in this equipment are all ISO
(meter-size) type screws. When replacing screws, use same type screws as equipped before.
• The part around the power connector J1 (especially, the IC6 regulator) may get hot. Do not touch
it to prevent burn injuries. And, do not apply a voltage other than the specified voltage of the product
(4.5 to 7.0 V), because it may cause burn injuries and the failure of internal circuits.