Renesas Compact Emulator M30620T-CPE - Manual (Page 22)

( 22 / 52 )
2.5 Connecting the Target System (as occasion demands)
Connect the LCC probe on the lower board of the emulator to the LCC socket (option) or the pitch
converter board (option).
Figure 2.8 LCC probe on the lower board of the emulator
Some MCU packages need the pitch converter board (option) shown in Figure 2.9. When connecting
it, be sure to check the position of No. 1 pin.
CAUTION
Notes on Connecting Target Systems:
• Take care not to attach the converter board in a wrong direction. It may cause a fatal
damage to the compact emulator.
• Always shut OFF power of the emulator and the target system when connecting and
disconnecting the target system.
Figure 2.9 Connecting target system
LCC probe at the lower board of compact emulator
80-pin
100-pin
0.65-mm-pitch 0.65-mm-pitch 0.5-mm-pitch
M3T-100LCC-80QSB
80-pin QFP
(option)
LCC socket
100-pn LCC
(option)
M3T-100LCC-QSD
100-pin LQFP
(option)