Renesas Compact Emulator M30620T-CPE - Manual (Page 25)

( 25 / 52 )
2.7 Starting Up Emulator Debugger PD30M
After checking the emulator has started up normally, start up emulator debugger PD30M.
For starting up emulator debugger, follow the steps below.
Click the start button of Windows.
And select Program (P) -> [RENESAS-TOOL] -> [PD30M V.1.10 Release 1*] -> [PD30M].
* Varies depending on the version of the emulator debugger.
2.8 Setting the Operating Environment of Emulator Debugger PD30M
After starting up PD30M, as the Init dialog box will open, set as shown in Figure 2.13. For details
on Init dialog box, refer to user's manual of PD30M.
Figure 2.13 Setting Init dialog box
(2) Select the serial port
where the emulator is
connected.
(3) After completed the
settings, click OK
button.
(1) Click Refer button and
select the MCU file
"M30620C.MCU".
The MCU file is stored
in the directory where
PD30M is installed.