Radio Shack 43-3857 - Manual (Page 9)

Installation
9
S
ETTING
M
ENU
O
PTIONS
There are five setup options: AutoTalk, CIDCW
(Caller ID on Call Waiting), Area Code, Dial Mode
and Language.
AutoTalk allows you to answer the phone without
pressing the
TALK/FLASH button. If the phone rings
when AutoTalk is on, simply remove the handset
from the base and the phone automatically answers
the call. If the phone rings when AutoTalk is off, you
must press
TALK/FLASH to answer the call.
Changing the Auto Talk and CIDCW
1. Press and hold CID/MENU .
2. Use VOL or VOL to move the pointer to
the selection that you would like to change.
Press REMOTE/SELECT to toggle between On
and Off .
3. Press END and return the handset to the base
unit to complete the setting. The handset
returns to the standby mode.
Entering your Area Code
If you enter a three-digit area code number in the
Area Code option, your local area code does not
appear in Caller ID messages. Do not program this
option, if your calling area requires ten-digit dialing.
When reviewing Caller ID messages, you will see
only the local seven digit number. For calls received
from outside your local area code, you will see a full
ten-digit number.
1. When the phone is in the standby mode, press
and hold CID/MENU .
2. Press VOL twice to select Area Code .
3. Press REMOTE/SELECT .
43-3857.book Page 9 Wednesday, February 18, 2004 12:40 PM