Radio Shack 43-3857 - Manual (Page 39)

T
he Integrated Answering D
e
vice
39
Remote access with the handset
You can operate your answering system from
another room using a handset.
Ô
1. With the phone in standby mode, press
REMOTE/SELECT on the handset. Remote
AnsweringMachine operation appears
on the display. The answering system
announces the current time and the number of
messages stored in the memory.
2. You hear "To play incoming message, press 2 .
For help, press 0 ." You hear intermittent beeps.
3. Enter a command within 15 seconds. You may
select a command from the following chart:
4. After the command has finished, you hear
intermittent beeps indicating that the system is
in the command waiting mode. You may enter
another command at this time from the chart on
step 3.
5. When you are finished, press END to exit the
system. The answering system automatically
returns to standby.
Command Function
/1 Repeat a Message
/2 Play Incoming Messages
/3 Skip a Message
/4 Delete a Message
/5 Stop Operation
6 Answering System On
9 Answering System Off
0 Voice Prompts
Ô
NOTES
Ô
• If you press END before
the base is connected,
the phone will return to
standby.
• If the base is not
connected within five
seconds, you hear
beeps and the phone will
return to standby.
• The base's keypad is
disabled during remote
operation.
• If you receive a call, the
remote operation is
canceled.
• During the remote
operation
[--] appears
on the base.
• If you have new
messages and old
messages, only the new
messages will be
played. After you have
reviewed your new
messages, you can play
your old messages by
pressing
/2 again.
43-3857.book Page 39 Wednesday, February 18, 2004 12:40 PM