Radio Shack 43-3857 User Manual
Page 38
T
he Integrated Answering D
e
vice
38
*For Memo Record and Greeting Message Record
function, the first time you enter the corresponding
command, it starts the Recording function. If you
want to stop the recording, enter the command
again.
5. After all of the Voice Prompts have played, you
hear intermittent beeps indicating that the
system is in the command waiting mode. You
may enter another command at this time from
the chart.
6. When you are finished, hang up to exit the
system. The answering system automatically
returns to standby.
Turn on the answering system remotely
If you have forgotten to turn on your answering
system, you can turn it on remotely from any touch-
tone telephone.
1. Call your telephone number.
2. Wait ten rings until the system answers. You
hear intermittent beeps.
3. Press
0
. And then enter your PIN code. The
answering system announces the current time
and the number of messages stored in
memory. You hear “To play incoming message,
press
02
. For help, press
10
”.
4. Press
0
. And then
6
to turn the answering
system On. You hear the outgoing message
and a confirmation tone.
5. Hang up the phone and subsequent calls will
be answered by the system.
43-3857.book Page 38 Wednesday, February 18, 2004 12:40 PM