Advanced functions, systems and settings, End an intercom call – RCA VISYS H5450 User Manual

Page 30

2. If it is a Base Unit assisted intercom call and system resources are busy, the dis-

play will show “System busy”. Otherwise, the handset receiver or headset will be

turned on.

NOTE: To cancel an intercom call at any time, press the End button.

Receiving an Intercom Call

1. When an intercom call arrives, the Cordless Handset will ring and/or vibrate. The

display will show the caller’s Extension ID (00–16).

NOTE: If there is more than one incoming call and intercom calls for the Cordless Handset,

only the first call’s information will be shown.

2. Press the

soft button to turn off the ringer or vibrator if you wish to

ignore the call.

NOTE: The

function is valid only for the current call.

3. Press the

Talk or Speaker button to answer the intercom call shown in

the display.

End an Intercom Call

To end a receiver call, a headset call or a speakerphone call, press the

End button or

place the Cordless Handset in charging cradle.

Ignore and Override an Incoming Line or Intercom Call

Making an Outbound Line Call

During an incoming or intercom call ring, the user can ignore the call and make an

outbound line call.
1. Press the

soft button.

2. Press 5 or 6 on the

Navigation button to scroll through the options until

“Line call” appears on the display.

Advanced Functions, Systems and Settings