RCA VISYS H5450 - Manual (Page 13)

Registering the Cordless Handset
11. Press the soft button.
12. The Cordless Handset will link to the Base Unit at this time.
13. When finished, the Cordless Handset display will show “Registration completed”.
The new ID number is shown on the first line of the Cordless Handset display.
14. Repeat the steps for each Cordless Handset to be registered.
Deregister Cordless Handset
You will program the Base Unit and the Cordless Handset to complete the procedure.
NOTE: Cordless Handsets must be deregistered from the Base Unit before the assigned ID can
be reused.
1. On the Base Unit, press the soft button.
2. Press 5 or 6 on the Navigation button to scroll through the options until
“Registration” appears on the display.
3. Press the soft button.
4. Press 5 or 6 on the Navigation button to scroll through the options until
“Deregister HS” appears on the display.
5. Press the soft button. Have the Cordless Handset ready to program.
6. The display on the Base Unit will show “Press DEREGISTER in HS menu options.”
A 30 second timer will begin at this point. If the deregistration process is not
completed in this time, the process will be canceled.
7. On the Cordless Handset, press the soft button.
8. Press 5 or 6 on the Navigation button to scroll through the options until
“Registration” appears on the display.
1