RCA VISYS H5450 - Manual (Page 24)

Using Your RCA 25450 Phone System
7. If the Cordless Handset loses the connection with the Base Unit due to interfer-
ence, it will try to re-establish the connection for 10 seconds and show
“Re-establishing connection …”
8. If the connection is re-established, it will enter talk mode. Otherwise, the display
will show “Connection lost” for 5 seconds and go back to standby screen.
Pre-Dialing
The Pre-Dialing function allows you to enter the number before accessing a phone
line.
1. To pre-dial a number, enter the phone number using the keypad (0–9, *, #) while
in Standby Mode.
2. Use the and soft buttons to edit the number entered. The
soft button erases the last digit entered. The soft button
erases the entire line but remains in the pre-dialing mode.
3. Press the Talk or Speaker button to make auto or manual line-selection dial.
4. If the dialing prefix function is enabled via phone setting menu, the dialing
prefix will be inserted before the phone number entered.
5. Before the auto or manual line-selection dial is made, an incoming call takes
priority and will cancel the pre-dialing.
Redial
The redial function allows the user to dial a number from the last 10 numbers dialed.
1. To redial a phone number, press the
soft button. The last phone num-
ber dialed will be displayed.
NOTE: if the redial log is empty, it will return to standby display in 5 seconds after displaying
“Redial log empty”.