RCA 27990 - Manual

I
NTRODUCTION
Your cordless telephone/answerer is designed to give you flexibility in use and high
quality performance. To get the most from your new cordless telephone/answerer, we
suggest that you take a few minutes right now to read through this instruction manual.
CAUTION: When using telephone equipment, there are basic safety
instructions that should always be followed. Refer to the IMPORTANT SAFETY
INSTRUCTIONS provided with this product and save them for future
reference.
B
EFORE
Y
OU
B
EGIN
P
ARTS
C
HECKLIST
Make sure your package includes the items shown here.
3. Plug the power supply into the power jack on the back of the base and the other end
into an electrical outlet. The “charge/in use” indicator comes on, verifying the
battery is charging.
Allow the phone to charge for 12 hours prior to first use. If you don’t properly
charge the phone, battery performance will be compromised.
4. Plug the telephone line cord into the TEL LINE jack on the back of the base and into
a modular phone jack.
CAUTION: Use only the ATLINKS USA, Inc. 5-2520(white/grey)
5-2521(black) power supply that came with this unit. Using other power
supplies may damage the unit.
W
ALL
M
OUNT
I
NSTALLATION
1. Remove the battery compartment
door on the handset, insert the
battery pack, plug the cord into
the jack (inside the
compartment), and replace the
compartment door.
2. Set the RINGER switch (on the
handset) to ON and place the
handset in the cradle on the base.
3. Plug the power supply into the
power jack on the back of the
base and plug the other end into
an electrical outlet. The “charge/
in use” indicator comes on,
verifying the battery is charging.
Allow the phone to charge for 12
hours prior to first use. If you
don’t properly charge the phone,
battery performance will be compromised.
NOTE: If desired, gather the extra power adapter line cord together, fasten with a wire
tie, and store inside the wall mounting bracket.
4. Remove the handset from the cradle and set aside. Turn the base over and align four
slots on the bottom of the base with the four hook-tabs on the bracket.
5. Insert the hook-tabs into the slots and push upwards until the bracket snaps
securely into place.
6. Plug the telephone line cord into the TEL LINE jack on the back of the base and into
a modular phone jack.
NOTE: If desired, gather the extra telephone line cord together, fasten with a wire tie,
and store inside the wall mounting bracket.
7. Slip the mounting holes over the wall plate posts and firmly slide the unit down
into place.
8. Place the handset in the cradle.
CAUTION: Use only the ATLINKS USA, Inc. 5-2520(white/grey)
5-2521(black) power supply that came with this unit. Using other power
supplies may damage the unit.
A
NSWERING
M
ACHINE
S
ETUP
This section shows you how to set up your answering machine to receive incoming
calls. Before you begin the setup, turn on the answerer.
• Press the answer on/off button to turn the answering machine on and off. The
MESSAGES indicator lights when the answering machine is on. The indicator blinks
when you have messages.
S
ETTING THE
V
OICE
T
IME
/D
AY
S
TAMP
1. Press and hold the day/check button to set the day of the week.
2. Press the hour button to set the hour (a.m. or p.m.).
3. Press the min button to set the minute. When you press and hold the min button, the
time advances in 5-minute intervals.
4. Press and release the day/check button to review the day and time settings.
S
ETTING THE
S
PEAKER
V
OLUME
Use the volume + or - switches on the base to adjust speaker volume to a comfortable level.
V
OICE
I
NSTRUCTIONS
If you need additional assistance, press the rev button when you plug in the answerer
and follow the voice instructions.
S
ETTING THE
R
ING
S
ELECT
Set the RING SELECT switch on the back of the unit to choose the number of times you
want the phone to ring before the machine answers the call. You can choose 3 rings or
5 rings.
R
ECORDING THE
O
UTGOING
A
NNOUNCEMENT
For best results when recording, you should be about 9 inches from the microphone,
and eliminate as much background noise as possible.
1. Press and hold the announce button. You need to hold the button until you finish the
announcement.
2. Begin talking after you hear the beep.
3. Release the button when you finish your announcement.
If you choose not to record an outgoing announcement, a default announcement will
play. To return to the default announcement after you have recorded your own outgoing
announcement, press the announce button and release it when you hear the beep or
simply press erase while your announcement is playing.
Sample Outgoing Announcement
Hi, this is (use your name here), I can't answer the phone right now, so please leave your
name, number and a brief message after the tone, and I'll get back to you. Thanks.
R
EVIEWING
A
NNOUNCEMENT
• Press and release announce button to review your outgoing announcement.
C
ORDLESS
P
HONE
B
ASICS
M
AKING A
C
ALL
The only two things you need to know to make a call are:
• Press the talk button before you dial.
• Press talk button or place the handset in the base to hang up.
Otherwise, it works just like any other phone.
CAUTION: Because cordless phones operate on electricity, you should have at least
one phone in your home that isn’t cordless, in case the power in your home goes out.
C
HARGE
/I
N
U
SE
I
NDICATOR
The phone is on when the antenna indicator on the handset and the charge/in use
indicator on the base is lit. The antenna indicator and the charge/in use indicator on
the base flashes when you receive a call.
R
EDIAL
Press the talk button, then press the redial button to redial the last number you called
(up to 32 digits).
If you get a busy signal, and want to keep dialing the number, press the redial button
again to dial the number.
R
ECEIVING A
C
ALL
To answer a call you must press the talk button on the handset before you can talk.
F
LASH
B
UTTON
Use the flash button to activate custom calling services such as call waiting or call
transfer, which are available through your local phone company.
TIP: Don't use the talk button to activate custom calling services such as call waiting, or
you’ll hang up the phone.
V
OLUME
B
UTTON
Press the handset VOL up or down buttons to adjust the volume of the handset's
earpiece. There are four settings.
M
UTE
B
UTTON
Use the mute button to interrupt a phone conversation to talk privately with someone
else in the room.
1. Press mute to activate mute feature (the antenna indicator blinks).
2. Press mute again to turn it off.
R
INGER
S
WITCH
The RINGER switch must be ON for the handset to ring during incoming calls.
T
ONE
/P
ULSE
S
ETTING
1. Make sure the phone is OFF.
2. Press the program button.
3. Press * tone button for tone or # pause for pulse selection.
4. Press the program button again. You will hear a confirmation tone.
P
AGING THE
H
ANDSET
Press the page button on the base to get the attention of the person near the
handset, or to find a misplaced handset. Press the talk button on the handset when you
find it.
NOTE: You can still page the handset with the ringer off.
R
INGER
T
ONE
S
ELECTION
There are 2 ringer tones for selection.
1. Make sure the phone is OFF.
2. Press program 1 or 2.
3. Press program to confirm the selection. You will hear a confirmation tone.
F
AST
R
EDIAL
When you hear a busy tone, you can redial the previously dialed number again by
pressing the redial button.
A
DVANCED
F
EATURES
C
HANNEL
B
UTTON
While talking, you might need to manually change the channel in order get rid of static
caused by baby monitors, garage door openers, or other cordless phones. Press and
release the chan button to advance to the next clear channel.
T
HE
M
EMORY
F
EATURE
Store up to 10 numbers in memory for quick dialing.
S
TORING A
N
UMBER IN
M
EMORY
The phone must be OFF when you store numbers.
1. Press the mem button.
2. Press a number key (0-9) to store the dialed number in that memory location. (If you
make an error storing the number, the phone beeps twice.)
3. Press the mem button.
4. Enter the number (up to 20 digits).
5. Press mem button to confirm. You will hear a confirmation tone.
CAUTION: If you make test calls to emergency numbers stored in memory, remain on
the line and briefly explain the reason for the call to the dispatcher. Also, it’s a good
idea to make these calls in off-peak hours, such as early morning or late evening.
I
NSERTING A
P
AUSE IN THE
D
IALING
S
EQUENCE
Press the #pause button to insert a delay in the dialing sequence of a stored telephone
number when a pause is needed to wait for a dial tone (for example, after you dial 9 for
an outside line or when you need to wait for a computer access tone). Each pause
counts as 1 digit.
C
HANGING A
S
TORED
N
UMBER
Use the same procedure to change a stored number as you do to store a number but
just replace the old phone number with a new one.
S
TORING A
R
EDIAL
N
UMBER
1. Make sure the phone is off.
2. Press the mem button.
3. Press any number key (0-9) to store the phone number in that memory location.
4. Press redial.
5. Press the mem button again to confirm.
D
IALING A
S
TORED
N
UMBER
1. Make sure the phone is ON.
2. Press the mem button.
3. Press the number for that memory location.
E
RASING A
S
TORED
N
UMBER
1. Make sure the phone is OFF.
2. Press and release the mem button.
3. Press the memory location you want to erase.
4. Press and release the mem button twice.
C
HAIN
D
IALING FROM
M
EMORY
Use this feature to make calls which require a sequence of numbers, for instance if you
use a calling card for a frequently called long distance number. The following example
shows how you can use chain dialing to make a call through a long distance service:
The Number For Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9
1. Make sure the phone is ON.
2. Press mem and then press 7.
3. When you hear the access tone, press mem and then press 8.
4. At the next access tone, press mem and then 9.
TIP: Wait for the access tones before pressing the next memory button, or your call
might not go through.
T
EMPORARY
T
ONE
This feature enables pulse (rotary) service phone users to access touch-tone services
offered by banks, credit card companies, etc. Press the *tone button to temporarily
make the phone touch-tone compatible. For example, to get information about your
bank account:
1. Call the bank’s information line.
2. Press the tone key, denoted with ( * ) on the keypad, when your call is answered.
3. Follow the voice menu instructions to get the information. When you hang up, the
phone goes back to pulse (rotary) service.
M
ODULAR
J
ACK
R
EQUIREMENTS
You need an RJ11 type modular wall jack, which is the most common type
of phone jack and might look like the one pictured here. If you don’t have
a modular jack, call your local phone company to find out how to get one
installed.
D
IGITAL
S
ECURITY
S
YSTEM
Your cordless phone uses a digital security system to protect against false ringing,
unauthorized access, and charges to your phone line.
When you place the handset in the base, the unit verifies its security code. After a
power outage or battery replacement, you should place the handset in the base for
about 20 seconds to reset the code.
INSTALLATION NOTE: Some cordless telephones operate at frequencies that may
cause interference to nearby TVs, microwave ovens, and VCRs. To minimize or prevent
such interference, the base of the cordless telephone should not be placed near or on
top of a TV, microwave oven, or VCR. If interference continues, moving the cordless
telephone farther away from the TV, microwave oven or VCR will often reduce or
eliminate the interference.
Certain other communications devices may also use the 2.4 GHz frequency for
communication, and, if properly set, these devices may interfere with each other and/
or your new telephone. If you are concerned with interference, please refer to the
owner’s manual for these devices on how to properly set channels to avoid
interference. Typical devices that may use the 2.4 GHz frequency for communication
include wireless audio/video senders, wireless computer networks, multi-handset
cordless telephone systems, and some long-range cordless telephone systems.
IMPORTANT: Because cordless phones operate on electricity, you should have at least
one phone in your home that isn’t cordless, in case the power in your home goes out.
I
NSTALLATION
D
ESKTOP
I
NSTALLATION
1. Remove the battery compartment door on the handset, insert the battery pack, plug
the cord into the jack (inside the compartment), and replace the compartment door.
2. Set the Ringer switch (on the handset) to ON, and place the handset in the cradle on
the base.
charge
in use
skip
erase
announce
answerer on/off
memo
rev
play/
stop
page talk mute
4 ghi
1
7 pqrs
* tone
6 mno
9 wxyz
# pause
5 jkl
8 tuv
0 oper
3 def 2 abc
redial mem
p la y/s top re v skip
erase chan flash off on ringer ans program
volume
Base Handset Wall mount
bracket AC power
supply Telephone
line cord
SEE MARKING ON BOTTOM / BACK OF PRODUCT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO PREVENT FIRE OR
ELECTRICAL SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
THE LIGHTNING FLASH
AND ARROW HEAD
WITHIN THE TRIANGLE
IS A WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE THE
PRODUCT. CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL. THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING THE
PRODUCT.
CAUTION:
2
3
4
27990
40-Channel 2.4 GHz
Cordless Telephone with
Digital Answerer
User’s Guide
FCC R
EGISTRATION
I
NFORMATION
Your telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15 and
68, FCC Rules and Regulations.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating, among other information, the FCC Registration number and Ringer
Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone
company.
The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these
devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices
connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as
determined by the REN, you should contact your local telephone company.
Notes
•
This equipment may not be used on coin service provided by the telephone company.
• Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you
are on a party line. Check with your local telephone company.
• Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.
2 Rights of the Telephone Company
Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall,
where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not
practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service
immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such
temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a
complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment, operations or procedures where
such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these
changes are expected to affect the use or performance of your telephone equipment, the telephone company must give
you adequate notice, in writing, to allow you to maintain uninterrupted service.
I NTERFERENCE I NFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference; and (2) This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).
• Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.
• Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician
for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C.
20402. Please specify stock number 004-000-00345-4 when ordering copies.
H EARING A ID C OMPATIBILITY
This telephone system meets FCC standards for Hearing Aid Compatibility.
FCC NUMBER IS LOCATED ON THE CABINET BOTTOM
REN NUMBER IS LOCATED ON THE CABINET BOTTOM
We bring good things to life.
Model 27990A
15714270 (Rev. 1 DOM E)
01-24
Printed in China
ATLINKS USA, Inc.
10330 North Meridian Street
Indianapolis, IN 46290
© 2001 ATLINKS USA, Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)
Handset
battery
5
6
3
7
Belt clip
charge
in use
skip
erase
announce
answerer on/off
memo
rev
play/
stop
page
answer on/off button
memo button
announce button
erase button
page button
Messages indicator
skip button
play/stop button
rev button charge/in
use indicator
volume buttons
day/check button
hour button
min button
talk mute
4
ghi
1
7
pqrs
*
tone
6
mno
9
wxyz
#
pause
5
jkl
8
tuv
0
oper
3
def 2
abc
redial mem
p la y/s top re v skip
erase
chan flash
off on
ringer ans program
volume
mute button
volume button
Headset jack
mem button
pause button
flash/program
button
Ringer on/off
switch chan/ans button
play/stop
button
redial button
talk button
tone button
rev button skip button
erase button