Ricoh CAMERA RDC-i500 - Manual (Page 62)

60
■ Selecting Auto (AUTO), Daylight ( ), Overcast ( ),
Tungsten Light ( ) or Fluorescent Light ( ).
A
Set the mode dial to [ ] or [ ] and
press the WB button.
B
Choose the white balance (AUTO, ,
, or ) and then press the
ENTER button.
C
Press the shutter release button to
record the image.
Note
• In AUTO mode, subjects lacking in white tones may not achieve an
appropriate white balance. When shooting such subjects, add a white
object to the composition.
• The flash will not fire when the white balance is set on (daylight),
(overcast), (tungsten light) or (fluorescent light) mode.
• Enable the keep settings mode to save the white balance mode
setting.
→
P.108 “Keep Settings”
Important
Note
• Even with the same subject, colors may vary due to the weather
conditions and light source (tungsten light or fluorescent light).