Ricoh CAMERA RDC-i500 - Manual (Page 114)

112
Setting the Power Saving Mode
This function enables you to reduce the power consumption of the LCD monitor
and extend the life of the battery.
A
Set the mode dial to [ ].
B
Select [CAMERA SETTINGS] and
press the
button.
C
Select [POWER SAVE] and press the
button.
D
Select [ON] or [OFF] and then press
the ENTER button.
The screen will return to the Camera Settings
menu.
E
Press the CANCEL button to return to
the Setup menu.
Note
• When the power save mode is set to ON, focusing will take more or
less time than using the LCD monitor. Take care when focusing
through the viewfinder.