Ricoh CAMERA RDC-i500 - Manual (Page 110)

108
Keep Settings
The keep settings mode enables you to save the settings after the camera is
switched off. The following settings can be saved.
• Flash mode
→
P.55 • ISO sensitivity
→
P.75
• Date imprint
→
P.67 • Time Exposure mode
→
P.77
• Focus mode
→
P.64 • White balance
→
P.59
• Sharpness mode
→
P.71 • CF CARD/IN
→
P.42
• Monochrome mode
→
P.72 • Voice memo
→
P.51
• Exposure compensation
→
P.58 • Guide List
• Flash strength
→
P.57
Note
• The contents of the Image Capture Guide List wil be saved when the
Guide list mode is saved.
A
Set the mode dial to [ ].
B
Select [CAMERA SETTINGS] and
press the
button.
C
Select [KEEP SETTINGS] and press
the
button.
D
Choose the items where you wish to
keep the settings and select [ON] or
[OFF].
Note
• The condition for each item means
as follows.
ON: Keep setting enabled
OFF: Keep setting disabled
E
Press the ENTER button.
The display will return to the Camera
Settings menu.
F
Press the CANCEL button to return to
the Setup menu.