Program for tv— direct entry method – RCA RCU404 User Manual

Page 5

(OFF)

ON•OFF

TV CODE

Program for TV—
Direct Entry Method

1. Manually turn on the TV.
2. Locate the enclosed TV Code List.

Find your brand of TV.

Note:

If your brand isn’t listed,

use one of the Code Search methods
to program this remote control
(See Code Search on page 9).

3. Press and hold the

CODE SEARCH

key until the indicator light
illuminates. Then release the

CODE SEARCH

key.

4. Press and release the

key. The

indicator light blinks and then remains lit.

5. Use the number keys to enter

the first code listed for your brand.
After you enter a valid three-digit
code, the indicator light turns off.

Note:

If you enter an invalid code,

the LED will flash rapidly for 2
seconds. Start over at step 3.

6. Aim the remote at your TV and press

the

ON•OFF

key. If your TV turns

off, you have found the correct code.

7. Enter the code in the box provided

on this page for future reference.

8. If your TV doesn’t turn off, repeat

steps 3-6 above, entering the next
code for your brand.
If none of the codes work or your
brand is not listed, use one of the
Code Search methods to program this
remote (See Code Search on page 9).
For a description of each key on
the remote control, refer to the Key
Descriptions section on page 3-4.

In order for the 4 component universal remote to control
your TV, you must program it with the TV code that matches
your TV. These instructions explain the preferred method
of programming the remote—the Direct Entry method.

CODE

SEARCH

INDICATOR

LIGHT

(BLINK)

RCU404_US_IB_REVB 7/16/03 15:34 Page 5